Sinbo High Quality Juice Extractor / Juicer

A good juicer makes it easy to whip up fresh-pressed produce in minutes. It has a delicate, simple, and beautiful design thanks to its combined structure; it is easy to operate and clean. High-speed motor with overheating protection; high efficiency, the economy in terms of time and power; long motor service life. A safety lock device is used for switching to ensure safety and reliability during operation.

It has a juice spout design and a container for holding the juice. Whole ingredients are typically dropped into the wider feed tube and pulverized at a very high speed The juice tends to come out a little foamy but most come with lidded pitchers and built-in strainers so you’ll never taste the difference. Juicing 1.

Ensure that the switch on your appliance is off before using your appliance. Thus, it may be prevented that the appliance starts to operate when the installation of components is not completed; and thus unnecessary damage to the appliance and injury to persons may be prevented.

2. Before starting to juice, ensure that the juice filter and wheel are engaged to their seats and that there is no harsh contact between the blade filter and the transparent cover. Place the transparent cover, insert handle to the cover housing, and then operate the appliance.

3. Before the operation, bring the juice spout to a sealing position to prevent the juice from overflowing and soiling the table after turning on the appliance 4. Note: The force you apply while pushing the food with the pusher shall be equal and indirect; pushing force shall not exceed 1 kg and force shall not be applied abruptly; otherwise juicing efficiency may be reduced. Warnings Before Use

1. This appliance is equipped with a safety device; the motor does not operate and secures the safety of the user when the handle is not seated on the cover or when the blade base is not pressed.

2. While removing or installing the components of the juicer, press the upper part of the feeding chute on the cover with your hand and push the handle inside to slide it inside or outside of the cover housing.

3. To remove the juice filter, remove the cover and pulp container first; then rotate the center ring up to 30 degrees while holding the juice spout by your hand and move it upwards; the filter shall be detached from the wheel automatically.

4. Check whether your power source is compatible with the rated voltage of the appliance before using the appliance to prevent damages.

5. Clean all detachable components (Refer to “Maintenance and Cleaning”).

6. Please follow the "Names and Locations of Main Components" diagram carefully while installing the components.

7. Please read the “Warnings” section carefully before starting to use your appliance. Operating Period This appliance is designed with a rocker switch for a power level of 0 / I / II (0 for stopping, I: less power, II: higher power). Select a higher power position for juicing. Stop for 1 minute after operating for 1 minute; then operate again.

After performing the operation above 3 times, stop the appliance for 15 minutes and do not operate until it is cooled. This would increase the service life of the appliance and it shall operate more efficiently. Precautions

1. Place the appliance on a fixed and level counter before starting to operate. Operate as described above.

2. Before starting to juice, ensure that the juice filter and wheel are engaged to their seats and that there is no harsh contact between the blade filter and the transparent cover. Place the transparent cover, insert handle to the cover housing, and then operate the appliance.

3. Before the initial operation, the motor shall operate in phase, it may cause a strange smell and sparks; this is normal. The phenomena described above shall disappear when the motor is operated for some time.

4. Ensure that not much juice and pulp is left in the center housing and in the pulp container while juicing. If they are filled, please turn off the appliance, clean the components, and then use the appliance again.

5. Do not open the container cover during operation. Do not insert your hand or any wire from the feeding chute while the appliance is on; otherwise, accidents with great damage may occur and the appliance may be damaged. Available in Nairobi. Deliveries made countrywide